Temperature & airhumidity

The setting window is divided into a section of temperature (top) and airhumidity (bottom). A section can be inaccessible if the functionality is unavailable to your system.

Figure 1

Chosen temperature
In a house where adjustable thermostats are used for regulating the heat of the floor or radiators, the chose temperature on figure 1 should not be used as the a desire comfort temperature. The comfort temperature should instead be controlled at each thermostat, and the chosen temperatur in figure 1 should work as a ceiling for the highest allowed comfort temperature. If the house is unused for a period the thermostat states should stay unchanged, and temperatur should be down-regulated to a desired minimum temperature. When the house once again should be warmed up, the chosen temperatur controlling the ceiling temperature is changed. This will increase the temperature to the desired temperature of each thermostat, and no varmer.
If only the house has no thermostats, the chosen temperature can work as the desired comfort temperature.

Heat regulation according to the chosen temperature is only done when "Thermostat auto" is on (read more about controlling of the thermostat).

Alarm temperature min/max
Min: In case the measured indoor temperature undesirely drops dispite heat regularion, a minimum temperatur can be set, working as a minimum threshold allowed before an alarm is generated for indoor temperature failure (indvendig temperaturfejl) (to setup alarm receivers see Alarm & security). This is known as frost protection.
Max: If the measured indoor temperature climbs to a value higher than what is chosen for alarm temperatur max, an indoor temperature failure alarm is generated as well.

A hysteresis of +2°C is used, why temperature measures slightly above the comfort temperature may occur.

Airhumidity alarm max
Is an airhumidity above this threshold measured, an airhumidity alarm (luftfugtighedsalarm) is generated (to setup alarm receivers see Alarm & security).