Overview

When the house-control remote control is opened the overview screen shot is display (shown on figure 1 beneath). This picture extracts some of the current status for the system. Change og settings can only be made from within each setting window for group of settings. This is done by clicking the helmet-buttons. The button at the top left shows columns- and a circlediagram, and opens the statistics.

A house-control system can be subject to a component list, telling the remote control which functionality is avilable, and which is not. If such exists, the status information for inaccessible component is disabled, and replaced by a '-'.

Figure 1 - Overview

The overview screenshot is grouped by functionality, and for some groups a bluegray boundary box can be seen. The grouping is labelled A to I on figure 1, and names:

A: House id, firmware, note amd statistics
B: Alarm & security
C: Latest update & queued instructions
D: Current errors
E: Temperature & airhumidity
F: Access control
G: Heat
H: Consumption
I: Light

Box A: House id, firmware, note amd statistics
In the labelled group A the house-control house id exists, which is an uniqie identification number, which is always used for referencing to the house-control system.
This group also counts a firmware number, which is a software version, telling flex-control a/s which functionality the house-control has available.
The note shown in the lower box, is often used for the address of the house, or for some other special information relevant for this house-control. The information can be changed without notice by clicking the helmet.
The statictics are described in the menu item of same name.

Boxes B, E-I
These boxes are explained in the menu by it respective name.

Box C
In the menu under overview exists submenu items explaining latest update and queued instructions.

Box D: Alarms
The current alarm or alarms are shown in the narrow box D. The burglar and smoke/fire alarm is also indicated graphically (see icons below). If the house control has not completed the communication procedure with the server for more than 24 hours, the house-control is considered offline, and any other alarms than offline will be removed from box D.

Previous alarms can be seen in the statistics.

Figure 5 - No alarm

Figure 6 - Fire alarm

Figure 7 - Burglar alarm

Alarms are handled as stated in Alarm & security.