The setting window for access control is depicted in figure 1.
The access code for owner (synonymous with administrator) and the access codes for super users and users, are all administered in the subwindows, accessed by clicking the respective button of same name (see "Access codes" beneath). All codes gives access to the house, but only a few gives access to remote control. See which here Types og users.
Code deactivation: Super user and users can be deactivated using code 0.
Figur 1
Door lock
The door lock can be opened and locked using the buttons "Open" and "lock".
If the door lock can only be locked using a twister/key when the handle has been pulled up (3-point lock), this will also apply for the house-control.
Internet access
Control of the Internet access for renters by unhooking the connection to the outlet and WIFI.
House cleaned
Indicated if the access code assigned for cleaning has been used.
Restriction from owner
Is the house used for renting, the booking agency can have the rights to deprive the house owner (administrator) one's rights to change the settings of the house control. If this settings is on, the owner can only see, but not change any settings.
Access codes
The visibility policy for access codes are defined in relation to renting purpose. This means that only the owner (administrator) can see and change one's access control, and that only super user 1 can see and change the super user access codes. This is because super user 1 has a special purpose as master code to the booking agency. If no rental agreement exist the owner can only see and change super user codes by logging on the system as super user 1.
Both the owner and super user can see and change all time limited user codes (figure 5).
If no need exists for the booking agency to administer more super users, or if the owner too rents out the house, the booking agency can be assigned super user 5 (synonymous to the booking super user), which also allows for remote control. As booking super user, only this code can be seen in the super user settings window (figure 4).
Figure 2
Figure 3
Figure 4 - Super user 5 (booking super user) logged on.
Figure 5
The number of available super users and users varies according to the software installed in the house control. Between 5-200 super users are available, and 5-20 users.
The access code must exists of an integer on 2 to 8 digits, and can be deactivated using code 0 (does not apply the owner).
